Install Wood Technology Flooring
Install Hardwood technology floors are in high demand today because of their beauty, environmental friendliness, value, and exotic appeal. Wood floors have also become very easy to get, install, and maintain with advances in technology.info technology hub
Install hardwood technology floors
Equipment needed to install hardwood technology floors is a broom or vacuum cleaner, tape measure, chalk and chalk line, hammer, hand saw, moisture meter, electric miter saw, tape, wood technology putty, safety glasses, floor cleaner. flats and lever. Installation guidelines are different for different types of hardwood technology floors: underfloor heating, glued floors, nail or adhesive floors, floating floors, etc.
There are a few things that must be done prior to installation: subfloors and their systems must be installed correctly according to the manufacturer’s instructions; the subfloor must be cleaned of dust, sealants, paints, waxes, curing compounds, grease, gypsum mud and any other substance that may affect the flooring material or the adhesive; Subfloor moisture should be tested to ensure it does not exceed 13%. Similarly, the moisture content of the wood floor technology should be less than 4% of the moisture content of the subfloor. Also, the lower floor should be flat and basements and crawl spaces should be dry.
wall straight and square with the space
Start with the wall straight and square with the space. The first row of boards can be nailed to the subfloor. Spread adhesive properly with a trowel to hold planks in place. Make sure the boards are aligned properly, as misalignment can cause holes to appear in previous rows. Spread the adhesive
only in limited areas as it can dry out in the meantime. For planks that have tabs and grooves, make
sure they are in place. Do not hit the board directly with a hammer as it may cause injury. Continue
to remove excess adhesive immediately from the floor as you work. So At the end of the row, make sure there are enough holes for expansion. Make sure not to walk on the floor for at least six to eight hours after installation. Clean the tape and adhesive from the floor. Examine the floor for scratches, nicks,
or holes in the boards. Use touch-up products like putty to cover up any scratches.
Hardwood technology floor installation is usually done by the supplier, although some manufacturers also have flooring that you can install yourself. However, follow the instructions carefully.